The patent pending Spray Pod Maxi is a very affordable and effective way of applying an air sealant or a spray adhesive through a 24oz & 29oz pressurized can. The Spray Pod Maxi can spray a polyurethane adhesive for any contractor that needs to air seal drywall or other particle board when it is installed. The spray gun on the Maxi has been designed to allow the use of 24 & 29oz cans and because it has an adjustable nozzle pattern the operator can go from a bead pattern to a fan pattern in a matter of seconds. This allows the operator to use the Spray Pod Maxi to seal an air leak that would most likely keep the building from being air tight.
The 2015 energy code is now requiring all new construction to be even tighter, having less than three air exchanges per hour. This means that even the vinyl homes that tend to “breathe” better may be a problematic as current tight stucco home. If a home has a system failure and water enters into the wall cavity, it may be there for a long time before it dries out. A situation like this isn’t good for the health of the home or it’s occupants. So this is why the Air Sealants Platform is such an effective spray technology, because it’s a simple and affordable way to air seal a new dry wall or subfloor.
So when it comes to air sealing, what is the single biggest challenge or frustration that you are running into right now. Many contractors would like for their air sealing task to be quicker. Others would like to see a simpler, more integrated tool. One contractor said that getting into and out of a hot attic was very important to them. So during the Spray Pod Mini launch at the Energy Efficiency Makeover 2016, we received a information and feedback as we worked not just with home performance contractors, but also with the Arkansas Electrical Cooperative Corporation and their members. Clearly air sealing touches so many stakeholders when it comes to performing energy efficiency retrofits.
The patent pending Spray Pod Mini is a very affordable and effective way of applying an air sealant through a 24oz can. The Spray Pod Mini can provide spray applications for the weatherization professional or any contractor that needs to apply a low pressure SPF in hard to reach areas that are difficult or even prohibitive with a regular two component kit. The spray gun on the Mini allows the use of 24oz can spray foam and because it has an adjustable nozzle pattern the operator can go from a bead pattern to a fan pattern in a matter of seconds. This allows the operator to use the Spray Pod Mini to air seal those areas around a residential house such as the air duct boots, attics, crawl spaces and rim joists. This portable air sealant machine is completely integrated system so you will have everything you need to make your job successful to fix those air leaks.